In recent years, the use of bidet sprays has become increasingly popular among households in Singapore. Not only are bidet sprays more hygienic than toilet paper, but they are also more eco-friendly and can save you a lot of money in the long run.
However, for those unfamiliar with bidet sprays, the installation process can be a bit intimidating. That’s why we’ve put together this step-by-step guide to bidet spray installation, which will walk you through the process from start to finish.
Whether you’re a DIY enthusiast or just looking to improve your bathroom experience, this guide will take you through all the necessary steps and provide you with the knowledge and confidence to install your own bidet spray.
Before diving into the installation process of a bidet spray, it’s worth exploring the various benefits and tools associated with this popular bathroom upgrade. Understanding the advantages and necessary tools can help you make an informed decision and ensure a successful installation.
Table of Contents
Advantages of Installing a Bidet Spray in Your Bathroom
Bidet sprays offer a range of advantages that make them a smart investment for personal hygiene. Below are some of the main benefits of using bidet sprays:
Improves Hygiene:
Maintaining proper hygiene is crucial for personal well-being, and when it comes to cleaning sensitive areas of the body, using water is the most effective way. Using dry toilet paper may leave behind bacteria and cause rashes, which is why it’s recommended to opt for a more hygienic alternative.
Bidets offer a superior cleaning experience, as they use water to cleanse the area, reducing the risk of bacterial infection and promoting better hygiene. So, if you prioritise your health and cleanliness, bidets are definitely worth considering.
Easy and Comfortable to Use:
Using a bidet spray is easy and convenient. It may seem daunting initially, but once you have it installed, you just need to turn on the faucet and adjust the spray to the right position. You can also adjust the pressure and flow to your preference.
Eco-Friendly:
In today’s world, preserving the environment has become a top priority for many people. While using toilet paper may seem like the easiest way to clean, it generates a significant amount of paper waste, leading to the cutting down of trees and harm to the environment.
Wet clothes may seem like a better alternative, but disposing of them can lead to sewer clogs, causing additional environmental problems.
Bidet sprays, on the other hand, are a more eco-friendly solution as they use minimal water and do not generate paper waste. Choosing bidet sprays for personal hygiene is a smart way to keep yourself clean while also taking care of the environment.
Cost-Effective:
Bidet sprays are cost-effective in the long run. While the initial cost of buying and installing a bidet spray may be higher than purchasing toilet paper, bidet sprays can save you money in the long run by reducing your reliance on toilet paper.
If you opt to use toilet paper instead of bidet sprays for personal hygiene, you’ll have to keep restocking it frequently, leading to increased costs over time. On the other hand, investing in a bidet spray is a one-time expense that can last for years.
Considerations When Buying and Installing a Bidet Spray
If you’re considering purchasing and installing a bidet spray, there are several things to keep in mind to ensure you get the right one for your needs.
Budget:
Bidet sprays are available at different price points, so it’s essential to determine how much you’re willing to spend before you start shopping.
Water Pressure Control:
Basic bidet sprays have fixed water pressure, but some models allow you to control the pressure to your liking. This feature can be particularly useful for individuals with sensitive skin. If this applies to you or a member of your household, it’s recommended to choose a bidet spray that provides water pressure control to avoid discomfort or irritation.
Durability:
Check the warranty offered by the seller on the bidet spray, which can indicate the product’s sturdiness. A warranty of at least one year or more suggests that the seller is confident in the product’s quality and durability.
Style and Features:
Bidet sprays come in different styles and may have additional features like flexible nozzles or warm water. Consider which features are important to you before making a purchase.
While many bidet sprays feature a fixed nozzle, those seeking greater cleaning flexibility may want to consider purchasing a bidet spray with adjustable settings. High-end models offer more warm water, making a more comfortable and effective cleaning experience.
Some bidets may also feature settings that allow for cleaning the toilet bowl or other surfaces in the bathroom, adding to their versatility. Investing in a quality bidet spray can ensure a more thorough and comfortable cleaning experience.
Materials:
Bidet sprays made from plastic are cheaper but less durable, while those made from higher-quality materials will be more expensive but also last longer. Consider the material of the bidet spray before purchasing to ensure that it meets your needs and budget.
Tools Required to Install Bidet Spray
Here are some tools that you need for bidet spray installation:
- Spanner or Wrench
- PTFE Seal Tape or Plumber’s Tape
- T-Valve
- Bidet Spray
- Measuring Tape
- Scissors
If you’re not comfortable working with plumbing or have no prior expertise with DIY projects, it’s best to hire a professional plumber to make sure a safe and proper installation.
Handheld Bidet Spray Installation: Step-by-Step Process
When preparing to install a bidet sprayer, it’s important to check your water supply line. This is the connection that runs between the toilet tank and the wall. If the water supply line is a rigid pipe, it will need to be replaced with a flexible water supply line before proceeding with the bidet installation.
Once you’ve confirmed that your water supply line is flexible, you can follow these steps to install your bidet sprayer.
Step 1: Turn Off the Water Supply:
To begin the installation process, you should turn off the water supply valve located on the wall next to your toilet. Flush the toilet to empty the remaining water in the toilet tank.
Step 2: Disconnect the Water Supply Line:
Once the tank is empty, locate the fill valve underneath the toilet and use a spanner to unscrew the water supply line. Before doing so, it’s important to be prepared for any potential leaks by having a bucket and rag nearby.
Step 3: Install the T-Valve:
Make sure that the flat rubber washer is positioned inside the top of your bidet’s T-valve before proceeding with the installation. You can easily locate the top of the T-valve by identifying the spinning nut.
Once you have confirmed the presence of the washer, it’s time to attach the T-valve to the toilet’s fill valve. This is done by screwing the top of the T-valve onto the fill valve at the spot where the water supply line was previously unscrewed.
Step 4: Install the Hose to the T-Valve:
Wrap the bottom of the T-valve with PTFE seal tape before screwing the water supply hose. This will create a water-tight seal, preventing any leaks and ensuring a reliable connection. Once the PTFE seal tape is wrapped around the T-valve, gently screw the water supply hose to the bottom of the T-valve.
Step 5: Attach the Bidet Spray Holder:
To ensure easy access to the bidet spray, attach the bidet spray holder to the side of the toilet tank in a convenient location. Position the holder where it can be easily reached during use and secure it in place.
If you prefer to mount the holder onto the wall but wish to avoid drilling, there are alternative methods you can use. Consider using drywall screws, anchors, or heavy-duty, double-sided tape to attach the spray holder to the wall. By doing so, you can avoid causing any damage to your walls while still securely attaching the holder.
Step 6: Turn on the Water Supply:
Once all the connections have been made, slowly turn the water supply valve back on. You should hear the water turn on and begin to fill the tank.
Step 7: Test the Bidet Spray:
To test the sprayer, turn on the valve located on the outside of the T-valve and point the sprayer at the toilet bowl. Gently compress the sprayer trigger until water starts to trickle out of the sprayer.
Now Check the hose and connections for leaks. If any connection is loose or leaking, add some plumber’s tape. If everything is leak-free, the bidet sprayer is installed and ready to use.
With these stages, you should be able to install a handheld bidet spray for your toilet. If you’re not comfortable installing the bidet spray yourself, you can always hire a professional plumber to install the bidet for you.
How To Use A Bidet Hose
A handheld bidet sprayer is a great option for cleaning yourself after using the toilet. It’s a smart idea to familiarise yourself with the device’s settings and water pressure before using it for the first time.
Step 1: Open the T-Valve:
The T-valve is an important component of the handheld bidet sprayer. It helps to regulate water pressure and prevent leaks when the sprayer isn’t in use. To turn on the T-valve, simply twist the handle to the ON position. This won’t activate the sprayer yet, but it will allow water to flow through the hose.
Step 2: Adjust the Bidet Sprayer Head:
When you’re ready to use the bidet sprayer, hold it comfortably in your hand and position the sprayer head in the toilet bowl. Depending on your preference, you can spray from the front or back. Aim the sprayer head at an upward angle towards the target area to avoid getting dirty water on the sprayer.
Step 3: Clean Yourself:
To start the bidet spray, gently squeeze or push the trigger. Avoid applying too much pressure because the water can be quite forceful. Adjust the angle of the sprayer head if needed to ensure that the water is hitting the target area. When you feel clean, release the trigger to stop the water flow.
Step 4: Disconnect Water Flow:
To avoid potential leaks and ensure that the bidet sprayer is functioning properly it’s important to turn off the T-valve when the sprayer is not in use. Simply twist the handle to the OFF position to stop the water flow.
To dry off after using a handheld bidet sprayer, you can use a few squares of toilet paper or a special towel or washcloth. Whichever method you choose, using a handheld bidet sprayer can help you stay clean while also reducing paper waste.
The Bottom Line
If you have decided to purchase and install a bidet spray in your bathroom, it is important to ensure that it is installed properly to avoid issues such as water leaks and potential damage to your home. Improper installation can also lead to increased water bills.
To ensure that your bidet spray is installed correctly and functions as it should contact a professional plumbing service such as Caprilio. Our experienced technicians can provide efficient and effective installation services to ensure your bidet spray is fully operational and meets your expectations.
